NutriBullet smells like burning

Why does NutriBullet smells like burning? This is not a normal smell for this blender, and it can be quite concerning.

Burning Nutribullet smell may be remedied. Unplug and cool the blender before repairing. Inspect the power cord. Replace damaged cables.

If not, check the blades. Food or debris may jam the blade assembly, creating overheating and a burning smell. Clean the blender blades. Clean the blades. Clean the blade assembly and try again.

This blog post will discuss the possible causes of this smell and what you can do to fix it.

What Is a NutriBullet?

a nutibullet

A NutriBullet is a single-serve blender typically used to make smoothies. They can, however, produce dips, salad dressings, sauces, and cocktails.

Unlike typical blenders, which use a huge jug with a cover that rests on top of the base to activate the blender, NutriBullets use a cup that locks into the base to activate the blender.

Why Does A Brand New Nutribullet Smells Like Burning?

The NutriBullet is not meant to be used as a regular countertop blender.

The NutriBullet is made to quickly make a smoothie in the morning by putting together fruit, seeds, leafy greens or nuts, and a liquid-like almond coconut water or milk.

There are two main reasons why your NutriBullet blender smells like burning rubber.

Both of them are discussed below.

There Is No Liquid In It

theres no liquid

The powerful motors in other blenders make it easy to blend any food, like a thick paste, nut butter, or ice cream. With a NutriBullet, this is not the case.

As was already said, a NutriBullet is made to make tasty smoothies that always include a liquid.

Before you start blending, you must fill the container with a lot of liquid (up to the max line), or the blades won't move. 

This will cause the motor to get too hot, which will make it smell like it’s on fire.

This is why a NutriBullet smells like it’s on fire. Some people don’t know that you have to put liquid in the blender container for it to work.

Over Blending the NutriBullet

over blending

Again, the NutriBullet is made so that you can make a smoothie quickly.

Ingredients that don’t need much blending include frozen strawberries, oranges, and leafy greens.

Because of this, the NutriBullet is not meant to blend for a long time.

The instructions from the company that made the NutriBullet say that you should blend for one minute and then turn it off.

If you need to blend the mixture more, let the motor cool down for 60 seconds and blend for another minute.

By stopping the machine after 60 seconds, the motor has time to cool down and doesn't get too hot. 

The second most common reason your NutriBullet smells like it’s on fire is that you’ve been blending it for too long.

I’ve had several NutriBullets over the years, and most of the time, 60 seconds is all you need to make a smoothie.

How To Fix A Burning Smell in The Nutribullet

how fix burning smell

Here are steps to eliminate a burning smell in the nutribullet;

Step#1. Unplug the Unit

The first thing you should do to fix a burning smell in a nutribullet is unplugging the unit.

If it’s still plugged in, there is a risk of fire. Once it’s unplugged, inspect the area around the power cord for any damage.

If you see any, replace the power cord.

Step#2. Check the Blades

If the burning smell comes from the blades, they’re likely damaged. Check the engine to make sure there isn’t anything stuck inside.

Check the brushes in the motor as well. These small pieces of graphite sit on the part of the engine that turns.

Note: They can move and break apart. You'll see black graphite dust (like pencil lead) around the motor, making the area smell like hot or burned plastic.

If they are only slightly broken or out of place, put them back where they belong.

If this isn’t possible, you can find cheap replacement parts at a store that sells them.

Step#3. Check Your Nutribullet Gaskets

check gasket

Ensure that all of the seals on your blender are in good shape.

If they are broken or cracked, water or dirt could have gotten into the engine and caused the hot smell. Replace damaged gaskets.

Step#4. Check The  Knife

If the knife on your nutribullet is broken, it can cause the motor to get too hot. Take it out of the bowl.

Check to see if the seals are good and if the bearings are running smoothly. If you see something wrong, change the parts.

Tip: Check to see if the knife is in good shape. If the blades are dull, the engine could overheat. If the knife isn't in good shape, you might want to get a new one.

Step#5. Clean the Unit

If there is no visible damage to the unit, the burning smell is likely coming from debris build-up.

Remove all removable parts and wash them in warm soapy water to clean the unit. Once they’re dry, reassemble the unit and test it out.

Step#6. Use the Guarantee

use guarantee

If you purchased your Nutribullet within two years, it’s still under warranty. Bring your warranty card for an exchange.

Step#7. Call A Repairer

Without a warranty, a professional repairman is your only option. He advises a diagnostic.

If you get your nutribullet fixed, it will order the components.

If you’re still having issues, or the burning smell is accompanied by smoke or sparks, please contact customer service for further assistance.

Tips On How To Prevent Burning Smell In Nutribullets

tips to prevent burning smell

When using a nutribullet, we should pulse it or turn it off after a few seconds of straight running.

It’s not a good idea to blend for 5 minutes straight. This can damage the motor of the nutribullet or even cause it to get too hot.

Keep Bugs and Mice from Getting into Your Nutribullet.

They can mess with the wires. When you turn on your nutribullet after mice or insects have broken the wires, it will be damaged.

Nothing can stop the nutribullet from smoking everywhere at this point.

Ensure you store your nutribullet somewhere clean and free of bugs and mice.

Don’t Overload

If you want to get rid of the burning smell, you can’t put too much in your nutribullet.

If you put too much in your nutribullet, you work it too hard. If you use a machine too much, it will surely break.

FAQs About Nutribullet Smell Like Burning

popular questions about nutribullet

Do you have any additional questions related to nutribullet smell like burning?

The following are some of the other questions that are often asked.

Can a Nutribullet Catch on Fire?

Yes, a nutribullet can catch on fire if it is misused. If you notice a burning smell while using your nutribullet, stop using it immediately and unplug it from the outlet.

Do not attempt to fix the problem yourself; instead, contact customer service for assistance.

When a Nutribullet Gets Too Hot, What Happens?

Overheating happens when the motor has to work too hard.

If the stress has been going on for too long, your motor may be completely broken.

At this point, even if you replace broken blades, seals, or couplers, the damage is already done.

How Often Should You Buy a New Nutribullet?

Depending on how well you take care of it, most nutribullet blenders last between 6 months and a year.

Seasons are a good way to think about it. When the weather changes and a new season starts, you should check on your sponge. It might still be more useful than you think.

Final Verdict.

Nutribullet smells like burning? So, if your Nutribullet smells like burning, it is most likely due to the motor burning out.

However, there are a few other potential causes, so check all of them before concluding that your Nutribullet is beyond repair.

If the problem can’t be fixed, you’ll need to buy a new one. Fortunately, Nutribullets are relatively affordable, so you shouldn’t have trouble finding a replacement.

Thanks for reading!

Similar Posts