Gas stove lights but won’t stay on?
This is one of the most frequent issues that bother almost everyone at some That on its own makes cooking tiresome.
Yes, cooking may occasionally be difficult and messy, especially when things don't go according to plan.
A gas stove can light but not stay lit for a variety of reasons. A partial obstruction in the valve is the most frequent of them all. Others may be due to a broken stove control, for example.
What goes wrong with a gas stove, or more specifically, why does a gas stove light but won’t stay on?
Reason #1: Partial Obstruction of the Burner
The most appropriate explanation for that is an obstruction, mostly a partial obstruction.
Small food particles will undoubtedly enter the gas burner during cooking because they can be untidy at times.
The flow of gas can become partially or entirely blocked if the burner is not cleaned properly after cooking.
This is because the burner receives fuel from the gas line to remain burning.
Since there is no gas passage at all, a total barrier prevents the gas from functioning fully.
A partial obstruction will initially permit the gas stove to function, but since the blockage restricts the supply of gas, the stove will quickly stop functioning.
Reason #2: Control Malfunction
A control malfunction is mostly a result of tampering or rough handling.
It is as rare as they come but it doesn’t mean we rule it out as a possibility.
In the case of the control malfunctioning, it is better to replace it as soon as possible to prevent accidents from happening.
To remedy the problem, we must first understand how it came about.
It might be caused by a stove control problem or a partial obstruction in the gas valve, as I stated earlier.
But what results in a snag or a fault?
Although clearing a gas blockage is extremely simple, doing so without taking the necessary safety steps can be complex and deadly.
Here are the procedures to follow to clear a gas blockage.
Step #1: Switch Off The Gas Valve
Most individuals completely disregard this and proceed forward to the cleansing phase.
If you’re not careful, that is extremely risky and might result in accidents and fatalities.
Before doing anything else, turn off your gas stove as soon as you realize it won’t light.
You can start inspecting the burner after turning it off. Make sure it is not releasing any gas.
Step #2: Check Burner for Issues
Sometimes when the gas stove won’t stay lit, it is because of the burner itself.
There are times the burner can get damaged due to natural wear and tear or overexposure to moisture which in turn causes rusting.
This could make it difficult or impossible for the gas to flow.
The burner should not be used in this situation since the gas stove may experience more harm as a result of the burner’s issues.
The better choice is to either replace or repair the burner.
Step #3: Examine The Gas Valve For Obstruction
Only after ruling out the burner as the problem’s cause should you check the valves for clogs.
Always inspect the valve that is closest to the burner while performing a check.
It is always the one that delivers gas to the burner and it is most prone to be obstructed by dirt.
The next stage will be finding a means to eliminate the dirt.
Step #4: Clear The Obstruction
You must exercise the utmost caution during this phase to prevent further damage.
You need to utilize a tiny, pointed object to accomplish this.
Make sure the instrument is just sharp enough to remove the dirt stuck in the valve without harming it, not too sharp.
After you’ve done all these, you can then proceed to test the gas stove.
Tip: Make sure to clean the burner after cooking to prevent valve clogging.
Gas-powered kitchen appliances are always easy to use and operate.
So what causes cases where a gas oven won’t stay lit when the dial is released or when a gas stove lights but won’t stay lit?
Dirt is the appropriate response.
No matter how straightforward a gas stove or oven may be, if it is not properly maintained, it will eventually break down.
Regular cleaning is essential to gas stove maintenance. Fortunately for us, it is rather simple to do.
Here are the dos and don’ts of cleaning a gas stove.
Before proceeding, here are the things not to do when cleaning a gas stove.
- Don’t use bleach, they can spoil the stove.
- Avoid using sharp objects to clean up dried-on spills.
Just like we mentioned earlier, make sure the gas is turned off before doing anything.
Remove the Burner and the Grates
Remove the burners and grates from the gas and immerse each one in a solution of liquid soap and water to help the dirt and grime dissolve.
Use Baking Soda
Baking soda aids in the removal of stubborn stains and crusted spills.
Due to its alkaline nature, baking soda assists in removing the filth by neutralizing it.
You can combine baking soda and water to produce a paste, which you can then apply to the surfaces you want to clean.
Before cleaning the surfaces with a soft brush, preferably an old toothbrush, wait a few minutes to help the grime dissolve.
You can also use the mixture to clean the burner and grate if the stain is too strong.
Use Vinegar or Lemon
Lemon and vinegar are both very acidic, as we all know. Because of this, they are quite effective at eliminating oily stains.
To clean the stove’s surfaces, use one of each together with a baking soda and water mixture and a soft sponge.
Pick the Specks of Dirts
Pick the tiny first in the valves with a small sharp object like a paper pin. Be very careful so as not to damage the valve
After cleaning all the dirt, make sure to rinse the burner and the other washed compartments properly and thoroughly.
This is the last part and also the most important. All the compartments must be put back in the right order.
The ones that require screwing should be screwed tightly to prevent gas leakage or further malfunctioning.
Read Next: Can You Use A Baking Pan On The Stove?
Conclusion on Gas Stove Lights But Won’t Stay On
It’s quite helpful to know why gas stove lights but won’t stay on. But hygiene is the secret to all of these.
Yes, cleanliness. You heard me.
It is best to regularly clean your gas stove as much as possible using the previously outlined procedure to prevent such blockages or failures in the future.
The likelihood of future obstructions will be lowered by the ongoing clearance of dirt.
It would prevent cases where the gas stove lights but won’t stay on.
It would also make the gas stove last longer by preventing wear and tear.
After reading this article, I hope you’ve learned a thing or two about gas stoves and their maintenance and that you put the knowledge to good use.